ExtB
SCPI Commands :
TRIGger:BASE:EXTB:DIRection
TRIGger:BASE:EXTB:SOURce
TRIGger:BASE:EXTB:SLOPe
- class ExtBCls[source]
ExtB commands group definition. 4 total commands, 1 Subgroups, 3 group commands
- get_direction() DirectionIo [source]
# SCPI: TRIGger:BASE:EXTB:DIRection value: enums.DirectionIo = driver.trigger.extB.get_direction()
Configures the trigger connectors as input or output connectors.
- return:
direction: IN | OUT IN: Input connector OUT: Output connector
- get_slope() SignalSlope [source]
# SCPI: TRIGger:BASE:EXTB:SLOPe value: enums.SignalSlope = driver.trigger.extB.get_slope()
Specifies whether the rising edge or the falling edge of the trigger pulse is generated at the trigger event. The setting applies to output trigger signals provided at the trigger connectors.
- return:
slope: REDGe | FEDGe REDGe: Rising edge FEDGe: Falling edge
- get_source() str [source]
# SCPI: TRIGger:BASE:EXTB:SOURce value: str = driver.trigger.extB.get_source()
Selects the output trigger signals to be routed to the trigger connectors. A list of all supported values can be retrieved using TRIGger:BASE:EXTA|EXTB:CATalog:SOURce?.
- return:
source: No help available
- set_direction(direction: DirectionIo) None [source]
# SCPI: TRIGger:BASE:EXTB:DIRection driver.trigger.extB.set_direction(direction = enums.DirectionIo.IN)
Configures the trigger connectors as input or output connectors.
- param direction:
IN | OUT IN: Input connector OUT: Output connector
- set_slope(slope: SignalSlope) None [source]
# SCPI: TRIGger:BASE:EXTB:SLOPe driver.trigger.extB.set_slope(slope = enums.SignalSlope.FEDGe)
Specifies whether the rising edge or the falling edge of the trigger pulse is generated at the trigger event. The setting applies to output trigger signals provided at the trigger connectors.
- param slope:
REDGe | FEDGe REDGe: Rising edge FEDGe: Falling edge
- set_source(source: str) None [source]
# SCPI: TRIGger:BASE:EXTB:SOURce driver.trigger.extB.set_source(source = 'abc')
Selects the output trigger signals to be routed to the trigger connectors. A list of all supported values can be retrieved using TRIGger:BASE:EXTA|EXTB:CATalog:SOURce?.
- param source:
string
Cloning the Group
# Create a clone of the original group, that exists independently
group2 = driver.trigger.extB.clone()
Subgroups